Fiberglass Fabric Ptfe

$0.014——0.66 USD

PVC right-angle U-shaped groove is a very practical building material with Anti Corrosion, high temperature resistance, wear resistance and other characteristics. It is widely used in construction, municipal administration, chemical industry and other industries, and can be used in engineering projects such as drainage, ventilation and cable laying. Easy to use, it becomes an important tool for solving corner problems. PVC right-angle U-shaped grooves play a big role in wall decoration. It can...

$ 1 - 6 Kilogram

Chopped (Glass Mat) strand mat is made of E/C chopped strands (Fiber glass) randomly distributed and bonded with powder or emulsion polyester binder. The mat is compatible with unsaturated polyester,(Fibreglass mat) vinyl ester and various other resins. Mainly used in hand lay-up, fiber winding and molding procedure. Typical FRP products include plates, storage tanks, ships, pipes, etc. Procedure of the production Handmade lamination Procedure Reinforcement material's type of fiberglass strands...

$ 0.46 - 4.6 Kilogram

Fiberglass of Stitched Mat Glass fiber stitching mat is made by cutting continuous strands (Fiber glass) into chopped strands and sewing them by machine.Construction and materials widely used in new fields such as the wind of energy. Fiberglass seam mat is a mat made of glass fiber twistless roving, which is cut into a certain length, laid flat evenly in a non-directional manner, and then sewn with a coil structure,grp materials, ）insulation material. Applicable to unsaturated of polyester...

$ 0.46 - 1.8 Kilogram

Tissue Mat of Fiberglass Our E/ECR/C fiberglass paper (Glass Mat) can be divided into pipe surface paper, roof paper, duct paper, floor paper, carpet paper, battery separator paper, gypsum sheath coated paper and polyurethane foam coated quality paper. The unit weight of the product is 20-120g/m2, the width is 45mm and 50mm or other, and the maximum width is 1 meter. Our products can be used in continuous winding, hand lay-up and pultrusion processes. The veil is mainly used for the surface...

$ 0.8 - 6 Kilogram

Fiber chopped strands are chopped warps of glass rovings and are suitable for reinforcing thermoplastics. Typical products include mechanical products, auto parts, electronic and electrical parts, etc. At the same time, it can be widely used as building and waterproofing materials, plastic floor base materials (Fiber glass), heat insulation materials, fiberglass paving paper, battery insulation boards(Glass Mat), air filter mat materials (Fiberglass cloth), reinforced gypsum, etc. Except for...

$ 0.46 - 1.8 Kilogram

Fiberglass needle punched felt is a kind of filter material (Fiber glass) with reasonable structure and good performance. It uses glass fiber as raw material, uses needle needles to needle punch the chopped stranded glass fiber felt after carding, and uses mechanical methods to make the gaps between the glass fibers in the felt layer. The fibers between the felt layer of glass fiber and the reinforced glass fiber (Fiberglass cloth) base cloth are entangled with each other, and the fiber mesh is...

$0.14——0.88 USD

It is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface. It has properties of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tead, shrink or bubble, while it hides joints, cracks and holes permanently. Fiber Glass self-adhesive mesh tape is composed of high-strength fiberglass fabric and special adhesive. It has excellent chemical stability and weather resistance, allowing long-term use in a...

$ 0.1 - 2.01 Square Meter

foil cloth Thermal radiation insulation cloth is a fire-proof and flame-retardant material made of glass fiber cloth and aluminum foil using a unique composite process. The composite aluminum foil has a smooth and flat surface, high longitudinal and transverse tensile strength, good radiation protection performance, and no Breathable, waterproof and good sealing (Anti Corrosion) performance Mainly used as insulation materials for cooling and heating equipment pipes and as sound-absorbing and...

$ 0.1 - 7.4 Square Meter

Silicone coated with fiberglass fabric is constructed from a fiberglass base cloth and impregnated or coated one side or both sides with a specially compounded silicone rubber. Due to silicone rubber physiological inert,not only increase the strength, thermal insulation, fireproof, insulating properties, but also has the ozone resistance, oxygen aging, light aging, climate aging, oil resistance and other properties. Fabric (Fire Blanket) expansion joints. Be isolated ( Fiberglass Fire Blanket)...

$ 0.1 - 3 Square Meter

The fire blanket (Home Fire Blanket) (Fire Blanket) is a specially treated fiberglass fabric that is very soft and smooth, does not irritate the skin, is heat-insulating and fire-proof, and can be used to extinguish oil and fire or cover the body for escape. The fire extinguishing blanket is a very soft fire extinguishing device. In the early stage of a fire, it can be used as the fastest oxygen insulation agent to extinguish and control the fire. It can also be used as a timely protection...

$ 0.1 - 2.01 Square Meter

This article shows 3732 aluminum foil cloth Fiberglass aluminum foil cloth is composed of aluminum foil conductive cloth and hot melt adhesive. A special flame-retardant adhesive is used to form a dense film after compounding. The compounded aluminum foil has a smooth and flat surface, high reflectivity, high vertical and horizontal tensile strength, and good air tightness, water （Fiber glass） tightness and sealing properties. High coverage, strong toughness and low value What types of...

$ 0.1 - 2.01 Square Meter

Aluminum foil (Industrial Textiles) (Aluminum Foil ) can be divided into roll aluminum foil and sheet aluminum foil according to its shape. Aluminum foil deep processing wool is mostly supplied in roll form, and sheet aluminum foil is only used in a few handicraft packaging situations. Aluminum foil can be divided into hard foil, semi-hard foil and soft foil according to the state. 0 Hard foil: Aluminum foil that has not been softened (annealed) after (Fireproof Cloth) rolling. If it is not...

$ 0.1 - 8 Others

The relative density is between 1.5 and 2.0, which is only 1/4 to 1/5 of carbon steel. However, the tensile strength is close to or even exceeds carbon steel, and the specific strength can be compared with high-grade alloy steel. Therefore, it has excellent results in aviation, rockets, spacecraft, high-pressure vessels and other products that need to reduce their own weight. The tensile, bending and compressive strength of some epoxy FRP can reach more than 400Mpa. FRP is a good...

$ 0.1 - 8 Piece/Pieces

Glass fiber rod is a pultruded fiberglass composite material (Fiber glass), which is a thermosetting elastic material made of continuous glass fiber roving and resin under the traction and molding of a pultrusion molding machine; the resin-rich layer on the surface makes it have good anti-corrosion (glass yarn) properties. It has light weight, high strength, good elasticity, stable and precise dimensions, and has excellent properties such as insulation, non-heat conductivity, flame retardant...

$ 0.1 - 8 Piece/Pieces

Fiberglass hexagonal rod is a pultruded fiberglass composite material. It is a thermosetting elastic material made of continuous glass fiber roving and resin under the traction and molding of a pultrusion molding machine; the resin-rich layer on the surface makes it have good anti-corrosion properties , it has light weight, high strength, good elasticity, stable and precise dimensions, and has excellent (Fiber glass)properties such as insulation, non-thermal conductivity, flame retardant,...

$ 0.1 - 8 Others

What is "glass fiber strengthed（Fiber glass）plastic"? Glass fiber strengthed resin matrix composite material is a kind of plastic commonly known as fiberglass fiberglass reinforced plastic Glass fiber serves as a reinforcement to provide the main mechanical properties of FRP! Monofilament - no robbing roving Felt: surface felt, chopped strand felt, continuous felt Fabric: uniaxial fabric, double fabric, triaxial fabric, quadriaxial fabric fiberglass reinforced plastic Glass fiber products are...

$ 0.1 - 8 Piece/Pieces

Fiberglass rod is a high-strength composite (glass rod) material made of raw wires pre-impregnated with resin and pultruded. Because it is light, highly elastic, acid and alkali resistant, anti-corrosion, good flexibility, beautiful, insulating, corrosion-resistant, and has comprehensive benefits It has good performance advantages and is mainly suitable for outdoor outdoor work supports, tourist tents, kite frames/umbrella frames, flagpoles(Fiber glass), arrow shafts, fishing rod tail tips,...

$ 0.1 - 8 Others

Glass fiber rod is a pultruded fiberglass composite material, which is a thermosetting elastic material made of continuous glass fiber roving and resin under the traction and molding of a pultrusion molding machine; the resin-rich layer on the surface makes it have good anti-corrosion properties. It has light weight, high strength, good elasticity, stable and precise dimensions, and has excellent properties such as insulation, non-heat conductivity, flame retardant, beautiful appearance and...

$ 0.1 - 8 Piece/Pieces

Glass fiber rod is a pultruded fiberglass composite(glass rod) material, which is a thermosetting elastic material made of continuous glass fiber roving (Fiber glass)and resin under the traction and molding of a pultrusion molding machine; the resin-rich layer on the surface makes it have good anti-corrosion properties. It has light weight, high strength, good elasticity, stable and precise dimensions, and has excellent properties such as insulation, non-heat conductivity, flame retardant,...

$ 0.1 - 8 Piece/Pieces

Let's take a look at how they are made. How pultruded products are made What is pultrusion? Pultrusion is a manufacturing method used to produce composite materials with tightly sized cross-sections. Through continuous and cost-effective processing, pultrusion technology is used for parts requiring good dimensional tolerances, high fiber volume fraction, excellent reinforcement alignment, precise control of resin and fiber. Glass fiber rod is a pultruded fiberglass composite material, which is...